Harmony remotes with 3.1

[towboy123]

Has anyone been able to get there Harmony remote to work with 3.1?

On mine the Right side LED does not light up at all when issuing commands

[randombits]

I am also having no luck with my Harmony 900 that was working fine with 2.1...

[mrandroid]

My harmony isn't working either with the HC3.1, though it did work with the 2.1.

[jm9843]

I haven't tried a Harmony remote with 3.1 yet but I noticed that they have to be enabled in the system settings. Have you enabled them?

[mrandroid]

I haven't tried a Harmony remote with 3.1 yet but I noticed that they have to be enabled in the system settings. Have you enabled them?

yes i have. The functionality needed to be enabled in the 2.1 build too. I've tried enabling, disabling then enabling, putting a reset in between there, plus a ton of other steps, and none of it works.

[towboy123]

The running services from 2.1 are not running on 3.1
I just want to make sure that it wasnt just me
Hopefully this will be fixed on the final build.

It would be nice if they had something in the works that allowed full harmony control and just hadnt added it to 3.1 yet

[Itsjusttim]

The running services from 2.1 are not running on 3.1
I just want to make sure that it wasnt just me
Hopefully this will be fixed on the final build.

It would be nice if they had something in the works that allowed full harmony control and just hadnt added it to 3.1 yet

Tried playing with all settings and no go with my Harmony. I guess we will have to wait for another newer version leaked or final. Can't imagine logitech not having it work with its own peripherals.

[Caligari]

I'm running the Honeycomb 3.1 UserDebug and my Harmony 890 remote functionality is hit or miss (mostly miss).
I find that only after some time has elapsed (1 hour or so?) my Harmony starts to work? It has never worked immediately after a reboot. Seems the service isn't starting until much, much later... very weird.

-Caligari

[Liam.f]

Could it be down to an app you're opening that the remote starts working? maybe they forgot to start the service when the machine goes live(it is a leak after all) but still have it set to start in another process.

[towboy123]

Mine quit responding to my Harmony and now IR commands cause the Harmony process to crash